Stand-N-Ride Pre-Mobility Electric Powered Scooter

EV Rider SNR-1001 Stand-N-Ride Pre-Mobility Electric Powered 500 Watt 24 Volt 3-wheel Scooter ( Free Shipping)

New 2010 Model SNR-1001
NEW Features Include:

Upgraded Kenda tires. These were an optional feature priced as an option.
MK 18Ah batteries - Longer lasting per charge . Another optional upgrade that is now standard, an optional upgrade priced at $130. These batteries come with a Free 6 month warranty included at no additional cost.
Throttle and brake lever on the right. This now enables the rider to open doors and navigate through with one hand operating the controls and the other holding the door open.
Oversized disc brakes

The Stand-N-Ride three wheel electric scooter is a top quality, stable and easily maneuverable 3 wheel scooter, designed for a variety of recreational and commercial applications. Unlike other mobility scooters, this simplified mobility scooter capable of carrying up to 300 lbs is ideal for use by pre-mobility candidates as a stand-up scooter or comfortably seated on an optional scooter seat.

Stand-N-Ride 3 Wheel Scooter - Disassembled With a powerful 500 watt but silent hub motor, the new two speed Stand-N-Ride scooter easily achieves 15 mph and can easily switch to slow mode at 7.5 mph. The battery is conveniently charged while on the scooter or can easily be lifted for charging anywhere to give you a 15-20 miles range on a full charge.

This mobility scooter is the most portable scooter with the heaviest part weighing only 43 lbs and can be dismantled to fit in the trunk of a small car. The SNR comes apart in less than 30 seconds into light weight pieces, tiller, base frame, battery pack, basket and seat without any tools. It will easily fit into the back of any compact car making transportation a breeze. The scooter handlebars are quickly adjustable making it easy to ride for people of different heights and children. The SNR scooter has a reverse motion capability and even better has a tiller that turns 360 degrees, so there is no need to use the reverse shifter.

Other standard features on the new Stand-N-Ride scooter includes keyed switch, front light, large detachable cargo basket, horn, non-marking tires, reverse mode and a convenient cup holder for your favorite drink while on the go.

Economical and practical, Fast and Fun to ride!

SNR-1000 3 Wheel electric scooter- Dimensions

Features

• Two speed switch, low 7.5 mph or 15 mph top speed
• Forward and reverse mode speed
• Included Charger and widely available 18AH Batteries
• Powerful 500 Watt 24 V BLDC Motor
• 300 lbs load weight capability
• Convenient, easy to remove and charge battery pack
• Optional seat can be installed easily in the field
• 15-20 miles range on a fully charged battery
• Patent-pending, wireless take-apart system
• Oversized detachable basket
• Non-marking and optional flat-free tires
• Cutting-edge LED headlight and horn
• Built-in cup holder
• Disc Brakes
• Free elegant safety helmet

SNR-1000 Scooter Standard Features:

Free Over-Sized Front Basket (Hooks on Front Handlebar OR Behind Seat)
Built in LED Front Light
Horn
Reverse Mode
Fast/Slow Modes with Variable Speed
Keyed Ignition
Non-Marking Tires
Cup Holder

SNR-1000 Scooter Common Applications:

Neighborhood Errands
Pre-Mobility Candidate scooter
Industrial and Commercial Uses
Warehouses
Airports
Security Patrols

Technical Specifications		Net Component Weights
Color	Black	Base	43.5 lbs
Overall length	992 mm / 36.3 in	Battery Pack	27.7 lbs
Overall width	642 mm / 25.3 in	Seat Assembly & Charger	11 lbs
Ground clearance	75 mm / 3 in	Tiller	40 lb
Weight capacity	136kg / 300 lb	Helmet	¼ lb
Top speed	24 km/h / 15 mph	Charger	1 lb
Motor type	Brushless DC hub motor, 24V, 500W	Basket	2¾ lb
Tire size	12.5” X 2.25” Pneumatic	Total Net Weight	121½ lb
Battery type	12V - 18 AH	Adjustable Dimensions
Charger	2A – Off Board	Seat Height	21-25 in from deck 28-32 in from ground
Optional Seat type	Oversized bicycle base with built-in backrest	Tiler Height	46 - 50 in from ground 39½ - 43½ in from deck