High Torque Electric Bicycle w/ patented folding frame in natural aluminum, 26" Triple Wall aluminum deep dish wheel rims, quick disconnect motor & LiFEPO4 battery
Genesis E-Bike Key Features
- BUILT IN THE U.S.A.!!!
- 2 Year Front to Back Manufacturer's Warranty
- 26" WHEEL FOLDING ELECTRIC BIKE
- LiFeP04 Lithium 2000+ CHARGE CYCLE BATTERY TECHNOLOGY
- Quick Disconnect 200 Watt Motor
- Rust and Corrosion Resistant Brushed Aluminum Alloy Frame
- Shimano Altus 7 Speed Gear System
Genesis stands for “the beginning” and the name choice for one of Prodeco’s
revolutionizing electric bicycles. The Genesis is the beginning of an unprecedented
e-bike in the industry where a rider is getting so much for so little. Features
abound, highest quality is evident and everything is packaged in a look for
the future while costing up to 50% less than the industry average where no other
ebike comes close. Whether going to work in the city or on a Saturday morning
ride in the park, the Genesis will take you there in style. Power on Demand
offers you to power to work with no pedaling effort to arrive fresh and then
get your exercise in by pedaling home while getting back in shape. The Genesis
HUB motor spins freely while not powering for a traditional bike ride feel with
its Shimano Altus drive train. Power is only a twist of the throttle away. Being
lightweight with a folding frame makes the Genesis perfect for Condo dwellers,
transporting in your car or easy storing anywhere. Arriving fully assembled
with only one stem bolt needing to be tightened, you will be up and riding in
minutes. Built in the USA, ease of service, quick disconnects, 2000+ charge
cycles LiFeP04 Lithium battery and a 2 year warranty throughout offers problem
free riding.
Genesis E-Bike Specifications
| Motor: |
200 Watt HO Brushless Mini w/ Disc Mount |
| Battery: |
Lithium LiFEPO4 24V 9Ah or 18Ah EZ Remove |
| Frame: |
Folding Aircraft Grade T6 Aluminum Alloy |
| Folding Lock: |
Patented 2 Stage Overlapped Locking EZ Adjust |
| Finish: |
Brushed Aluminum w/ Clear Coat Protection |
| Fork: |
Zoom Aluminum Alloy w/ Pre-Load Adjust |
| Power: |
Twist Throttle Control |
| |
|
| Headset: |
CH Cartridge Bearing w/ Sealed Alloy Top |
| Stem: |
Promax 31.8mm Adjustable Aluminum Alloy |
| Handlebar: |
Promax Polished Mid-Rise Aluminum 31.8 x 600L |
| Front Brake: |
Promax Disc 320 Bearing Caliper w/ SS Rotor |
| Rear Brake: |
Promax Disc 320 Bearing Caliper w/ SS Rotor |
| Brake Levers: |
Promax XL-86 Alloy Bracket & Lever |
| Cables: |
Stainless Steel in Lined Ti Finish Braided Housing |
| Crankset: |
Forged Aluminum 170 Arms w/ 44 x 3/32" CR |
| Chain Guard: |
Aluminum Alloy Sandblasted |
| Bottom Bracket: |
PT 100.5mm Sealed Bearing 68mm English |
| |
|
| Pedals: |
Aluminum Alloy & Nylon Folding w/ Cr-mo Axles |
| Chain: |
KMC X8.93 Narrow 1/2" x 3/32" |
| Rear HUB: |
WR 135mm 36H Freebody w/ Quick Release Axle |
| Rear COG: |
Shimano HG 11-28 7 Speed Cassette |
| Rear Derailleur: |
Shimano Altus 7 Speed |
| Shifter: |
Shimano HG TX50 7 Speed Index |
| Rims: |
Stars 12G x 36H Triple Wall Aluminum Deep Dish |
| Spokes: |
Stainless Steel 12G & Solid Brass Nipples |
| Tires: |
Kenda Kontact 26” x 1.95” |
| Tubes: |
Kenda 26” X 1.95” 48mm Valve |
| Kick Stand: |
Center Mount All Aluminum Double Leg |
| Seat Post: |
Promax HD Machined Aluminum 27.2” x 350MM |
| Seat Post Bracket: |
Promax Double Barrel Bolt Infinite Adjust |
| Saddle: |
Prodeco Vented Comfort 10.25" x 6.25" |
| Reflectors: |
Cateye White Front & Wheels w/ Red Rear |
| |
|
| Speed: |
17 MPH |
| Range per charge: |
15 - 25 Miles |
| Battery Charging Cycles: |
2000 + |
| Battery Charging Time: |
3 - 4 Hours |
| Weight Capacity: |
220 LBS |
| Frame & Parts Warranty: |
2 Years |
| Electronics Warranty: |
2 Years |
| Bike Net Weight: |
46 LBS |
Genesis E-Bike Features
Quick Disconnect 200W Motor - At only 5.5 lbs, the Prodeco
200W mini brushless HUB motor offers high performance at a high efficiency.
200 watts is sufficient to allow a rider to power at twice the average speed
of a traditional bicycle rider pedaling. With electric bicycles, the marriage
of the motor, controller and battery is crucial in offering a decent range per
charge cycle. The 200W motor also incorporates Prodeco’s
quick weatherproof disconnect directly at the motor, tire or tube changes are
no longer an issue when comparing to other electric bikes. The connector located
within a few inches from the motor allows for a two-second disconnect and the
motorized wheel can be easily removed hassle free.
LiFePO4 Li-ion Battery Systems - Manganese and Cobalt have
been the main choice in Lithium cathode material used for the lithium electric
bicycle market over the past three years. The high cost but low life expectancy
(700 cycles) of these batteries fails to offer the longevity required by most
ebike riders. LiFePO4, the latest lithium technology increases the cycle life
to 2000 plus. The LiFePO4 system is highly more stable, can charge at higher
amps and does not deteriorate with heat unlike the majority of the current ebike
lithium batteries.
Patented Aluminum Folding Frames - Fabricated from aircraft
grade aluminum, the G Plus Genesis' frame is designed for strength, portability,
comfort, quality and longevity while maintaining a unique style. An overlapping
Heavy Duty adjustable folding mechanism with an integrated safety latch assures
the easy 15 second fold while offering the strength of a rigid frame.
Ships Assembled - The Genesis' folding frame allows the bicycle
to be shipped fully assembled. There are no requirements other than one stem
bolt to tighten when receiving the bicycle. You will be up and riding in a few
minutes.
USA Built - All Prodeco electric bicycles are designed, assembled
and quality controlled in the USA. Bicycles are produced on a daily basis in
our Florida facility with no inventory being built older than 1 week prior to
shipping. This allows for all components including batteries to remain 100%
fresh and the latest stock. Overseas quality control is not consistent and the
reason behind Prodeco’s reasoning for building the Genesis in the USA.
2 Year Front to Back Warranty - A full part replacement EZ
warranty remains in effect for 2 years from the date of purchase. If any component
fails during this time, it will be replaced for a new component. EZ warranty
replacement includes full motor wheel replacement. If for any reason your motor
fails during the first 2 years, Prodeco will replace the complete wheel including
rim and spokes. The new wheel will ship fully balanced and with the Motor’s
easy disconnect; only a few minutes is required for removal and installation.
LiFePO4 batteries are fully warranted for 2 years with no prorating. If your
battery fails on month 23, a new LiFePO4 battery will be shipped.
Rust and Corrosion Resistant - The outdoor environment is a
bike’s worst enemy. The Genesis utilizes aluminum alloys, stainless steels and
cromoly for 95% of all components and hardware. We understand the importance
of year after year use, and an owner’s need for their bike to remain rust and
corrosion free with continued performance and good looks. Small attention to
details such as an alloy nut headset, alloy chain guard and stainless steel
spokes have been implemented throughout the bicycle.
Brushed Aluminum Finish - The Genesis' finish is a natural
aluminum which has been brushed and coated with 2 coats of Clear Paint. The
decals are placed under the clear as not to scratch or peel. All components
were also maintained in their natural aluminum finish or sandblasted aluminum
and anodized for protection.
Throttle Powered - The Genesis’ motor is controlled via a variable
throttle. Throttling permits riders to pedal when they prefer and establish
assist according to their requirements, i.e (steep hill, no pedaling effort,
bad knee, etc...). A light twist of the throttle produces a slow and soft ride
while the full twist of the throttle generates a quick and exhilarating ride.
Quick Connect Controllers - Electric bicycle controllers are
the brain to the functions of an ebike. The Storm’s controller is a maintenance
free sealed unit. If the controller ever has an issue, it can be changed within
a few minutes due to the Genesis’ use of a wire harness and simplified
connectors. Issue proof connectors allow for connecting or disconnecting the
controller in a matter of seconds.
Cartridge Bearing Headsets - The Genesis uses an upper and
lower cartridge bearing headset with a sealed aluminum alloy nut for high strength,
years of issue free performance, and zero rust.
Sealed Bearing Bottom Brackets - To maintain the concept of
no maintenance, the Genesis utilizes Prodeco’s maintenance-free sealed cartridge
bearing system for the bottom bracket. Prodeco’s bottom bracket contains an
axle/spindle made of cromoly for higher strength and resistance to rust and
spins freely on dual maintenance free sealed bearings. A standard 68/73 BSA
ENG measurement is used.
Free Body HUB & Cassette - The front motor design allows for
the use of a free body HUB & Cassette, not to be mistaken with a freewheel.
Shimano’s HG 7 Speed free body multi-cog cassette slides over a free body HUB.
Quick Release Rear Axle - The Quick Release “QR” axle offers
a “tool free” 30-second rear wheel removal for flats, service or as a theft
deterrent. With the quick removal of the rear axle, the bike will no longer
be able to be ridden and tire or tube changes are a breeze.
Shimano Altus 7 Speed Gear System - The Shimano Altus
derailleur is from the MTB style Shimano component group; however, finds itself
equally at home with city, hybrid and sport bikes. A step above the Tourney
system, the Altus provides a feeling of “easy control” that inspires confidence,
especially among novice cyclists.
Alloy Chain Guard - Chain Guards on the Genesis are aluminum
alloy and not the plastic or steel found on most bikes, they will not rust and
are lightweight.
KMC X8.93 Chain - KMC’s X8.93 chain incorporates extra
stretch proof mushroomed pin enhancement for durability. Finished in two tone
with links in bright nickel plated plates separated by gray plates. The X8.93
offers these added benefits: Double “X” Bridge Shape Outer Plate (excellent
gear shifting), Bushingless Construction (smooth transmission), StrecthProof
Treatment (SP exceptional durability), Noiseless Function (noise reduction),
Mushroomed Riveting (high pin power) and Inner Plate Chamfering (expeditious
articulating).
High Performance Braking System - The Genesis utilizes
Promax’s DSK320 Front and Rear Caliper Disc Brakes with 160mm Polygon Stainless
Steel Disc Rotors. XL-86 Levers (Promax’s Best) complete the system. Disc brakes
offer advanced performance and the Storm stops on a dime. Calipers offer a nice
contrast in a Distinctive Charcoal Finish.
12G Stainless Steel Spokes - Stainless Steel 12G spokes are
thicker and up to 100% stronger than the typical 14G spokes found on most traditional
bicycles. The added strength will offer years of issue-free performance while
sacrificing minimally in weight savings. Stainless steel is used for its natural
resistance to rust and high strength.
Deep Dish Triple Wall Rims - The Genesis’ 3 walls of
aluminum rims offer advanced strength and flexing is almost non-existent when
combined with Prodeco’s 12G stainless steel spokes. Balanced and trued wheels
remain balanced and trued. At 25mm wide and 43mm high, they are pronounced in
size but give hint to the strength they bear and a perfect match to the 1.95”
Kendas.
Kenda Low Resistance Tires - As with any e-bike, tire choice
is critical for distance per charge. The Genesis' use of Kenda’s SRC Comfort
Contacts allow for low resistance and smooth riding with a solid road surface
grip. Kenda’s SRC line best attributes are the low rolling resistance, extreme
durability and high tread longevity wrapped all into one universal package.
Adjustable 31.8 Stem - Riders come in all sizes and riding
positions vary in comfort for each rider. With the Genesis' adjustable handlebar
stem, the perfect position is easily found with a quick adjustment whether wanting
the bar high and close or low and forward. The stem is not only capable of adjusting
degree of angle from front to back but also for quill height. The stem additionally
allows for condensing of the handlebar for storing, transporting or shipping.
Folding Aluminum & Nylon Pedals - High quality
double bearing folding pedals are included with all Storms. The pedals use an
aluminum body with a nylon cage floating on double bearings over a cromoly spindle.
No plastic folding pedals here!
Braided Housings & Stainless Steel Cables - Braided
and Lined housings with stainless steel cables are an added layer of protection
and durability. All housings are lined for the smoothest braking while inner
stainless steel cables allow for rust and corrosion resistance. The addition
of the braided layer not only increases the strength of the cable housing but
adds an attractive detail typically reserved for only custom built bicycles.
