High Torque Electric Bicycle w/ patented folding frame in black pearl finish, 20" Double Wall Aluminum Wheel rims, quick disconnect motor & LiFEPO4 battery
Mariner Sport E-Bike Key Features
- BUILT IN THE U.S.A.!!!
- 2 Year Front to Back Manufacturer's Warranty
- 20" WHEEL FOLDING ELECTRIC BIKE
- LiFeP04 Lithium 2000+ CHARGE CYCLE BATTERY TECHNOLOGY
- Quick Disconnect 200 Watt Motor
- Rust and Corrosion Resistant Alloy w/Black Pearlescent Finish
The Mariner Sport is designed with incredible style to be the perfect electric
folding bicycle that will turn heads in the Marine Environment. Power on demand
throttle, Lightweight, salt air friendly, EZ folding/ portable for easy storing
and virtually maintenance free, are some of the features which make the Mariner
Sport your best friend for traveling around town or Country. Built in the USA
with a full 2 year warranty, she is built to last and will offer years of top
performance. With full adjustability, she fits all ages and types of riders
from 5’ 3” to 6’ 3”. Whether crossing a College Campus, trailing the RV Park
or running errands around town, the Mariner Sport is the perfect travel companion.
Highest quality, beautiful finishing, sport features, are all terms fitting
to the Mariner Sport. Easily folding to less than 3 square feet, the Mariner
Sport is the pinnacle of all 20” electric folding bicycles. The Mariner Sport
can be adjusted for all sizes with the height adjustable handlebars and saddle.
When you pull into port or at the beach and spend the afternoon exploring the
town, there is no better way than on the Mariner Sport electric bicycle. This
electric bicycle was built to last right down to the last nut and bolt. Easily
foldable for simple transportation in car trunks and storage. The Mariner Sport
E-bike arrives completely assembled and ready to ride.
Mariner Sport E-Bike Specifications
| Motor: |
200W HO Brushless Mini w/ Disc Mount |
| Battery: |
Lithium LiFEPO4 24V 9Ah EZ Remove |
| Frame: |
Patented Folding Aircraft Grade T6 Aluminum Alloy |
| Folding Lock: |
Patented 2 Stage Overlapped Locking EZ Adjust |
| Finish: |
Black Pearlescent w/ Clear Coat Protection |
| Fork: |
Zoom Aluminum Alloy w/ Pre-Load Adjust |
| Power: |
Twist Throttle Control(Pedal Assist Available) |
| |
|
| Headset: |
CH Cartridge Bearing w/ Sealed Alloy Top |
| Stem: |
Moya Aluminum Alloy Folding w/ QR Height Adjust |
| Handlebar: |
Moya Aluminum Alloy T-Bar 6º Sweep 520mm L |
| Front Brake: |
Promax Disc 400 w/ Pad Adjust Knob & SS Rotor |
| Rear Brake: |
Promax TX-120 W/ Alloy Cartridge & RED HP 72 Pads |
| Brake Levers: |
Promax XL-86 Alloy Bracket & Lever |
| Cables: |
Stainless Steel in Lined Ti Finish Braided Housing |
| Crankset: |
Forged Aluminum 170 Arms w/ 44 x 3/32" CR |
| Chain Guard: |
Aluminum Alloy Sandblasted & CNC |
| Bottom Bracket: |
PT 100.5mm Sealed Bearing 68mm English |
| |
|
| Pedals: |
HTI Aluminum & Nylon Folding w/ Dbl Bearings |
| Chain: |
KMC K810 Two Tone 1/2" x 3/32 |
| Rear HUB: |
WR 110mm 36H Sealed Bearings & Quick Release |
| Rear COG: |
CP 16T 1/2" x 3/32" |
| Rims: |
Stars 12G x 36H Double Wall Aluminum |
| Spokes: |
Black Stainless Steel 12G & Solid Brass Nipples |
| Tires: |
Kenda Kontact 20” x 1.75” |
| Tubes: |
Kenda 20” x 1.75” |
| Kick Stand: |
Center Mount Aluminum Height Adjustable |
| Seat Post: |
Sumono Aluminum Suspension 27.2” x 350mm |
| Seat Post Bracket: |
Sumono Double Barrel Bolt Infinite Adjust |
| Saddle: |
Prodeco Sport 2T 10” x 7” |
| Reflectors: |
Cateye White Front & Wheels w/ Red Rear |
| |
|
| Speed: |
16 MPH |
| Range per charge: |
15 - 25 Miles |
| Battery Charging Cycles: |
2000 + |
| Battery Charging Time: |
3 - 4 Hours |
| Weight Capacity: |
220 LBS |
| Frame & Parts Warranty: |
2 Years |
| Electronics Warranty: |
2 Years |
| Bike Net Weight: |
42 LBS |
Mariner Sport E-Bike Features
Quick Disconnect 200W Motor - At only 5.5 lbs, the Prodeco
200W mini brushless HUB motor offers high performance at a high efficiency.
200 watts is sufficient to allow a rider to power at twice the average speed
of a traditional bicycle rider pedaling. With electric bicycles, the marriage
of the motor, controller and battery is crucial in offering a decent range per
charge cycle. The 200W motor also incorporates Prodeco’s
quick weatherproof disconnect directly at the motor, tire or tube changes are
no longer an issue when comparing to other electric bikes. The connector located
within a few inches from the motor allows for a two-second disconnect and the
motorized wheel can be easily removed hassle free.
LiFePO4 Li-ion Battery Systems - LiFePO4, as the latest lithium
technology available increases the battery cycle life to 2000 plus charges.
The LiFePO4 battery system is highly more stable, can charge at higher amps
and does not deteriorate with heat unlike the majority of the current e-bike
lithium batteries. Manganese and Cobalt used to be the main choice in Lithium
cathode material used for the lithium electric bicycle market over the past
years. The high cost but low life expectancy (700 cycles) of these batteries
has failed to offer the longevity required by most e-bike riders.
Patented Aluminum Folding Frames - Fabricated from aircraft
grade aluminum, the G Plus Mariner Sport' frame is designed for strength, portability,
comfort, quality and longevity while maintaining a unique style. An overlapping
Heavy Duty adjustable folding mechanism with an integrated safety latch assures
the easy 15 second fold while offering the strength of a rigid frame.
Ships Fully Assembled - The Mariner Sport’s 3 way fold allows
the bicycle to be shipped fully assembled. There are no requirements to install
any components when receiving the bicycle. Even the pedals are installed and
the Mariner Sport is fully adjusted and tested before shipping. You will be
up and riding in a few minutes
USA Built - All Prodeco electric bicycles are designed, assembled
and quality controlled in the USA. Bicycles are produced on a daily basis in
our Florida facility with no inventory being built older than 1 week prior to
shipping. This allows for all components including batteries to remain 100%
fresh and the latest stock. Overseas quality control is not consistent and the
reason behind Prodeco’s reasoning for building the Mariner Sport in the USA.
2 Year Front to Back Warranty - A full part replacement EZ
warranty remains in effect for 2 years from the date of purchase. If any component
fails during this time, it will be replaced for a new component. EZ warranty
replacement includes full motor wheel replacement. If for any reason your motor
fails during the first 2 years, Prodeco will replace the complete wheel including
rim and spokes. The new wheel will ship fully balanced and with the Motor’s
easy disconnect; only a few minutes is required for removal and installation.
LiFePO4 batteries are fully warranted for 2 years with no prorating. If your
battery fails on month 23, a new LiFePO4 battery will be shipped.
Rust and Corrosion Resistant - The outdoor environment is a
bike’s worst enemy. The Mariner Sport utilizes aluminum alloys, stainless steels
and cromoly for 95% of all components and hardware. We understand the importance
of year after year use, and an owner’s need for their bike to remain rust and
corrosion free with continued performance and good looks. Small attention to
details such as an alloy nut headset, alloy chain guard and stainless steel
spokes have been implemented throughout the bicycle.
Black Pearlescent Finish - The Mariner Sport Sport’s features
a black pearlescent finish with multitudes of diminutive flakes covered in a
3D deep clear. The decals are placed under the clear as not to scratch or peel.
All major components are either polished black or sandblasted black and anodized
for protection.
Throttle Powered - The Mariner Sport’ motor is controlled via
a variable throttle. Throttling permits riders to pedal when they prefer and
establish assist according to their requirements, i.e (steep hill, no pedaling
effort, bad knee, etc...). A light twist of the throttle produces a slow and
soft ride while the full twist of the throttle generates a quick and exhilarating
ride.
Quick Connect Controllers - Electric bicycle controllers are
the brain to the functions of an ebike. The Storm’s controller is a maintenance
free sealed unit. If the controller ever has an issue, it can be changed within
a few minutes due to the Mariner Sport’ use of a wire harness and simplified
connectors. Issue proof connectors allow for connecting or disconnecting the
controller in a matter of seconds.
Cartridge Bearing Headsets - The Mariner Sport uses an upper
and lower cartridge bearing headset with a sealed aluminum alloy nut for high
strength, years of issue free performance, and zero rust.
Sealed Bearing Bottom Brackets - To maintain the concept of
no maintenance, the Mariner Sport utilizes Prodeco’s maintenance-free sealed
cartridge bearing system for the bottom bracket. Prodeco’s bottom bracket contains
an axle/spindle made of cromoly for higher strength and resistance to rust and
spins freely on dual maintenance free sealed bearings. A standard 68/73 BSA
ENG measurement is used.
Sealed Bearing HUBs - The front motor HUB and rear wheel HUB
float on maintenance free sealed bearings for a flawlessly smooth ride. For
additional service free issues, both HUBs are fabricated out of aluminum alloy
for zero rust.
Alloy Chain Guard - Chain Guards on the Mariner Sport are aluminum
alloy and not the plastic or steel found on most bikes, they will not rust and
are lightweight. To add a little flare, Prodeco utilized CNC machining for cut
outs and etching for a stylish look
KMC Rust Buster - Rust Buster” chain treatment process
withstand the rigors of 500 hours of salt spray testing without rusting
High Performance Braking System - The Mariner Sport utilizes
a Promax DSK400 Front Caliper and Polygon Disc Rotor with a TX120 Rear V Brake
holding aluminum cartridges and RED shoes. XL-86 Levers (Promax’s Best) complete
the system. Not only is this for the purpose of advanced performance braking,
but also for the ease of adjusting and servicing. Disc Calipers include a “Tool-Free”
clearance adjustment knob for on-the-fly adjusting, and rear Aluminum Cartridges
allow for a one-minute shoe replacement. All brakes feature a Distinctive Charcoal
Finish.
12G Stainless Steel Spokes - Stainless Steel 12G spokes are
thicker and up to 100% stronger than the typical 14G spokes found on most traditional
bicycles. The added strength will offer years of issue-free performance while
sacrificing minimally in weight savings. Stainless steel is used for its natural
resistance to rust and high strength.
Double Wall Rim - Rim strength is important with any bicycle;
but, with electric bicycles it is of utmost importance. Electric bicycles consistently
travel at higher speeds than traditional bikes. With the added strength of 12G
spokes and a motorized HUB, rims have to be above standard strength. The Mariner
Sport uses a slightly wider 24mm rim than typically found on a 20” wheel. The
Mariner Sport’s rim side corners are double walled along with a double wall
for the base offering improved strength and resistance to flexing. They were
specifically manufactured for 12G spokes and the perfect match for Prodeco’s
high performance 200W motor.
Kenda Low Resistance Tires - As with any e-bike, tire choice
is critical for distance per charge. The Mariner Sport' use of Kenda’s SRC Comfort
Contacts allow for low resistance and smooth riding with a solid road surface
grip. Kenda’s SRC line best attributes are the low rolling resistance, extreme
durability and high tread longevity wrapped all into one universal package.
Folding Aluminum & Nylon Pedals - High quality
double bearing folding pedals are included with all Storms. The pedals use an
aluminum body with a nylon cage floating on double bearings over a cromoly spindle.
No plastic folding pedals here!
Braided Housings & Stainless Steel Cables - Braided
and Lined housings with stainless steel cables are an added layer of protection
and durability. All housings are lined for the smoothest braking while inner
stainless steel cables allow for rust and corrosion resistance. The addition
of the braided layer not only increases the strength of the cable housing but
adds an attractive detail typically reserved for only custom built bicycles.
Quick Release Rear Axle - The Quick Release “QR” axle
offers a “tool free” 30-second rear wheel removal for flats, service or as a
theft deterrent. With the quick removal of the rear axle, the bike will no longer
be able to be ridden and tire or tube changes are a breeze.
Suspension Seat Post - An aluminum alloy suspension
seatpost smoothes out the rear bumps while the suspension forks smooth out the
front. The pre-tension is fully adjustable for a softer or firmer ride. Dual
front & rear adjusting bolts in barrel nuts permits an easy adjustment in pivoting
the saddle nose’s incline or decline.
Folding Handlebar with Height Adjustability - Riders
come in all sizes and with the Mariner Sport’s adjustable height handlebar,
riders from 5’ 3” to 6’ 3” can adjust it for optimum comfort. The handlebar
also folds to further reduce the size of the bicycle upon being folded.
Frame Mounts - The Mariner Sport has incorporated
frame mounts for water bottles and fenders. The traditional sized mounts are
welded directly to or through the frame. Stainless Steel hex bolts are included.
