High Torque Electric Bicycle w/ patented folding frame in natural aluminum,
26" Triple Wall aluminum deep dish wheel rims, quick disconnect 500 watt motor &
36v LiFEPO4 battery
Phantom X E-Bike Key Features
- BUILT IN THE U.S.A.!!!
- 2 Year Front to Back Manufacturer's Warranty
- 26" WHEEL FOLDING ELECTRIC BIKE
- LiFeP04 Lithium 2000+ CHARGE CYCLE BATTERY TECHNOLOGY
- Quick Disconnect 500 Watt HO Brushless Direct Drive Motor
- Rust and Corrosion Resistant Brushed Aluminum Alloy Frame
- Shimano TX71 6 Speed Gear System
Phantom X 500 Watt Motor Electric bike was developed by Prodeco technologies
for those wanting a high powered electric bicycle for steep inclines with little
to no pedaling effort. At 500W, power is sufficient and ready to push you around
town. The Phantom X’s high torque motor required a battery up to the challenge.
A 36V 12Ah for Phantom X2 and 9AH for Phantom X LiFePO4 2000+ charge cycle Li-ion removable battery with built in
LED rear light was developed specifically for this model to dish out the Amps
as needed. Aggressive in style and not for the faint of heart, the Phantom X
is finished in all satin black, with a full array of black alloy components
and just enough red trim. This is not your grandpa’s electric bike, this is
a serious road machine ready to turn some miles. There is no other electric
bike on the market which can compare. At our price, the Phantom X cost ½ of
the closest competitor’s model yet superior in quality. Built in the USA, ease
of service, quick disconnects, 2000 charge cycle li-ion battery and a 2 year
warranty throughout offers trouble free riding. SUVs are no longer necessary
to transport your bike, this beauty easily folds for transportation and storage.
This bike is built with alloys, stainless steels and rust resistant components
to last a lifetime. Arriving fully assembled with only one stem bolt needing
to be tightened, you will be burning up the road in matter of minutes.
Phantom X E-Bike Specifications
| Motor: |
500W HO Brushless Direct Drive |
| Battery: |
Lithium LiFEPO4 36V 12Ah(X2)/9AH(X) EZ Remove |
| Frame: |
Folding Aircraft Grade T6 Aluminum Alloy |
| Folding Lock: |
Patented 2 Stage Overlapped Locking EZ Adjust |
| Finish: |
Flat Black Charcoal |
| Fork: |
Zoom Aluminum Alloy w/ Pre-Load Adjust |
| Power: |
Twist Throttle Control |
| |
|
| Headset: |
CH Cartridge Bearing w/ Sealed Alloy Top |
| Stem: |
Promax 31.8mm Adjustable Aluminum Alloy |
| Handlebar: |
Promax Sand Blasted Straight Aluminum 31.8 |
| Front Brake: |
Promax Disc 320 Bearing Caliper w/ SS Rotor |
| Rear Brake: |
Promax Disc 320 Bearing Caliper w/ SS Rotor |
| Brake Levers: |
Promax XL-86 Alloy Bracket & Lever |
| Cables: |
Stainless Steel in Lined Ti Finish Braided Housing |
| Crankset: |
Forged Aluminum 170 Arms w/ 44 x 3/32" CR |
| Chain Guard: |
Aluminum Alloy Sandblasted |
| Bottom Bracket: |
PT 100.5mm Sealed Bearing 68mm English |
| |
|
| Pedals: |
Aluminum Alloy & Nylon Folding w/ Cr-mo Axles |
| Chain: |
KMC X8.93 Narrow 1/2" x 3/32" |
| Front HUB: |
WR 100mm 36H Sealed Bearing Quick Release Axle |
| Rear Sprocket: |
14-28 6 Speed Cassette |
| Rear Derailleur: |
Shimano TX71 |
| Shifter: |
Shimano HG TX50 6 Speed Index |
| Rims: |
Stars 12G x 36H Triple Wall Aluminum Deep Dish |
| Spokes: |
Black stainless Steel 12G & Solid Brass Nipples |
| Tires: |
Kenda Kontact 26” x 2.125” |
| Tubes: |
Kenda 26” X 2.125” 48mm Valve |
| Kick Stand: |
Center Mount All Aluminum Double Leg |
| Seat Post: |
Promax HD Machined Aluminum 27.2” x 350MM |
| Seat Post Bracket: |
Promax Double Barrel Bolt Infinite Adjust |
| Saddle: |
Prodeco Vented Comfort 10.25" x 6.25" |
| Reflectors: |
Cateye White Front & Wheels w/ Red Rear |
| |
|
| Speed: |
20 MPH |
| Range per charge: |
25 - 35 Miles |
| Battery Charging Cycles: |
2000 + |
| Battery Charging Time: |
4 - 6 Hours |
| Weight Capacity: |
220 LBS |
| Frame & Parts Warranty: |
2 Years |
| Electronics Warranty: |
2 Years |
| Bike Net Weight: |
54 LBS |
Phantom X E-Bike Features
Quick Disconnect 500W Motor - Prodeco’s direct drive 500W brushless
HUB motor offers over the top performance as an ebike. The 500W high output
motor also incorporates Prodeco’s quick weatherproof disconnect directly at
the motor, tire or tube changes are no longer an issue when comparing to other
electric bikes. The connector located within a few inches from the motor allows
for a two-second disconnect and the motorized wheel can be easily removed hassle
free.
36V LiFePO4 Li-ion Battery Systems - Manganese and Cobalt have
been the main choice in Lithium cathode material used for the lithium electric
bicycle market over the past three years. The high cost but low life expectancy
(700 cycles) of these batteries fails to offer the longevity required by most
ebike riders. LiFePO4, the latest lithium technology increases the cycle life
to 2000 plus. The LiFePO4 system is highly more stable, can charge at higher
amps and does not deteriorate with heat unlike the majority of the current ebike
lithium batteries. The Phantom X utilizes 32 cells and includes a rear Built
in LED light for night time riding
Patented Aluminum Folding Frames - Fabricated from aircraft
grade aluminum, the G Plus Phantom X's frame is designed for strength, portability,
comfort, quality and longevity while maintaining a unique style. An overlapping
Heavy Duty adjustable folding mechanism with an integrated safety latch assures
the easy 15 second fold while offering the strength of a rigid frame.
Ships Assembled - The Phantom X's folding frame allows the
bicycle to be shipped fully assembled. There are no requirements other than
one stem bolt to tighten when receiving the bicycle. You will be up and riding
in a few minutes.
USA Built - All Prodeco electric bicycles are designed, assembled
and quality controlled in the USA. Bicycles are produced on a daily basis in
our Florida facility with no inventory being built older than 1 week prior to
shipping. This allows for all components including batteries to remain 100%
fresh and the latest stock. Overseas quality control is not consistent and the
reason behind Prodeco’s reasoning for building the Phantom X in the USA.
2 Year Front to Back Warranty - A full part replacement EZ
warranty remains in effect for 2 years from the date of purchase. If any component
fails during this time, it will be replaced for a new component. EZ warranty
replacement includes full motor wheel replacement. If for any reason your motor
fails during the first 2 years, Prodeco will replace the complete wheel including
rim and spokes. The new wheel will ship fully balanced and with the Motor’s
easy disconnect; only a few minutes is required for removal and installation.
LiFePO4 batteries are fully warranted for 2 years with no prorating. If your
battery fails on month 23, a new LiFePO4 battery will be shipped.
Rust and Corrosion Resistant - The outdoor environment is a
bike’s worst enemy. The Phantom X utilizes aluminum alloys, stainless steels
and cromoly for 95% of all components and hardware. We understand the importance
of year after year use, and an owner’s need for their bike to remain rust and
corrosion free with continued performance and good looks. Small attention to
details such as an alloy nut headset, alloy chain guard and stainless steel
spokes have been implemented throughout the bicycle.
Satin Black Finish - The Phantom X’s finish is out of a Batman
movie, satin black with just enough red trim. All components are either anodized
sandblasted black or anodized polished black for a truly aggressive look.
Throttle Powered - The Phantom X’s motor is controlled via
a variable throttle. Throttling permits riders to pedal when they prefer and
establish assist according to their requirements, i.e (steep hill, no pedaling
effort, bad knee, etc...). A twist of the throttle produces a surge of exhilarating
power.
Quick Connect Controllers - Electric bicycle controllers are
the brain to the functions of an ebike. The Storm’s controller is a maintenance
free sealed unit. If the controller ever has an issue, it can be changed within
a few minutes due to the Phantom X’ use of a wire harness and simplified
connectors. Issue proof connectors allow for connecting or disconnecting the
controller in a matter of seconds.
Cartridge Bearing Headsets - The Phantom X uses an upper and
lower cartridge bearing headset with a sealed aluminum alloy nut for high strength,
years of issue free performance, and zero rust.
Sealed Bearing Bottom Brackets - To maintain the concept of
no maintenance, the Phantom X utilizes Prodeco’s maintenance-free sealed cartridge
bearing system for the bottom bracket. Prodeco’s bottom bracket contains an
axle/spindle made of cromoly for higher strength and resistance to rust and
spins freely on dual maintenance free sealed bearings. A standard 68/73 BSA
ENG measurement is used.
Free Body HUB & Cassette - The front motor design allows for
the use of a free body HUB & Cassette, not to be mistaken with a freewheel.
Shimano’s HG 7 Speed free body multi-cog cassette slides over a free body HUB.
Quick Release Front Axle - The Quick Release “QR” axle offers
a “tool free” 30-second rear wheel removal for flats, service or as a theft
deterrent. With the quick removal of the rear axle, the bike will no longer
be able to be ridden and tire or tube changes are a breeze.
Shimano TX71 6 Speed Gear System - The Shimano TX71 derailleur
provides smooth shifts and offers just enough effort to get a little exercise
in by pulling back the throttle and letting your legs do the work.
Alloy Chain Guard - Chain Guards on the Phantom X are aluminum
alloy and not the plastic or steel found on most bikes, they will not rust and
are lightweight.
KMC X8.93 Chain - KMC’s X8.93 chain incorporates extra
stretch proof mushroomed pin enhancement for durability. Finished in two tone
with links in bright nickel plated plates separated by gray plates. The X8.93
offers these added benefits: Double “X” Bridge Shape Outer Plate (excellent
gear shifting), Bushingless Construction (smooth transmission), StrecthProof
Treatment (SP exceptional durability), Noiseless Function (noise reduction),
Mushroomed Riveting (high pin power) and Inner Plate Chamfering (expeditious
articulating).
High Performance Braking System - The Phantom X utilizes
Promax’s DSK320 Front and Rear Caliper Disc Brakes with 160mm Polygon Stainless
Steel Disc Rotors. XL-86 Levers (Promax’s Best) complete the system. Disc brakes
offer advanced performance and the Storm stops on a dime. Calipers offer a nice
contrast in a Distinctive Charcoal Finish.
12G Stainless Steel Spokes - Stainless Steel 12G spokes are
thicker and up to 100% stronger than the typical 14G spokes found on most traditional
bicycles. The added strength will offer years of issue-free performance while
sacrificing minimally in weight savings. Stainless steel is used for its natural
resistance to rust and high strength.
Deep Dish Triple Wall Rims - The Phantom X’s 3 walls
of aluminum rims offer advanced strength and flexing is almost non-existent
when combined with Prodeco’s 12G stainless steel spokes. Balanced and trued
wheels remain balanced and trued. At 25mm wide and 43mm high, they are pronounced
in size but give hint to the strength they bear and a perfect match to the 1.95”
Kendas.
Kenda Low Resistance Tires - As with any e-bike, tire choice
is critical for distance per charge. The Phantom X's use of Kenda’s SRC Comfort
Contacts allow for low resistance and smooth riding with a solid road surface
grip. Kenda’s SRC line best attributes are the low rolling resistance, extreme
durability and high tread longevity wrapped all into one universal package.
Adjustable 31.8 Stem - Riders come in all sizes and riding
positions vary in comfort for each rider. With the Phantom X's adjustable handlebar
stem, the perfect position is easily found with a quick adjustment whether wanting
the bar high and close or low and forward. The stem is not only capable of adjusting
degree of angle from front to back but also for quill height. The stem additionally
allows for condensing of the handlebar for storing, transporting or shipping.
Folding Aluminum & Nylon Pedals - High quality
double bearing folding pedals are included with all Storms. The pedals use an
aluminum body with a nylon cage floating on double bearings over a cromoly spindle.
No plastic folding pedals here!
Braided Housings & Stainless Steel Cables - Braided
and Lined housings with stainless steel cables are an added layer of protection
and durability. All housings are lined for the smoothest braking while inner
stainless steel cables allow for rust and corrosion resistance. The addition
of the braided layer not only increases the strength of the cable housing but
adds an attractive detail typically reserved for only custom built bicycles.
